Thanks df2x4, so you're running the Auxbeam 9005 leds for highs and a halogen for lows.
In reference to the fitting, the OEM's light bezels have a thin plastic retaining ring held by 3 small screws. These rings have 3 notches that allow the bulbs to be inserted and twisted into a locking position.
With the Spyders, they don't come with any retainer rings and you can't use the OEM retainer rings because the 3 mounting screw holes do not line-up with the pre-manufactured holes on the Spyders. Thus making no way to hold the bulbs in place.....Unless I'm missing something here
You must be registered for see images attach
Huh... Do you have a picture of the back of your Spyders? My Anzos have the retaining rings with the cutouts just like the factory housings. It sounds like maybe you got a set of Spyders with a manufacturing defect.
But yes, both of my '97s are running Anzo 111004 housings with Philips Xtreme-Vision +100 9006 halogen low beams and Auxbeam S1 9005 LED high beams.
EDIT - Just realized I said I was using the Auxbeam S3s in an earlier post when I actually have the S1s. I'll update the other post to avoid confusion.