Single Dynomax Bullet

[ChevyDude84]

Hey guys, quick question. I have a 98 5.7 exhaust is all stock ( Not sure on entire system piping diameter can anybody help me with this?) but I want to install just a dynomax bullet for now and get rid of the junkie OEM muffler.

Would this make the system louder with everything else being stock? or should I just cut off the muffler and none.

Thoughts?

 

[dagen_1]

louder yes, loud period, no

i have two dumped at the axle with headers... and my truck isn't "loud"

 

[ChevyDude84]

louder yes, loud period, no

i have two dumped at the axle with headers... and my truck isn't "loud"

what size bullet/s do you have?

 

[dagen_1]

gosh i've had them for years.. i'd say 17" or 18" 2.5" diameter

 

[ChevyDude84]

gosh i've had them for years.. i'd say 17" or 18" 2.5" diameter

I have seen in another forum the popular size for these are 12inches... maybe a single 12' would make a difference? the next problem is finding the correct diameters

 

[Vortec Lover]

glasspacks

my answer to all exhaust questions

 

[dagen_1]

I have seen in another forum the popular size for these are 12inches... maybe a single 12' would make a difference? the next problem is finding the correct diameters

shorter should be louder

glasspacks

my answer to all exhaust questions

i agree... and they'll be my next choice.

 

[badazzbulldog]

I put a 12 on our 99 4.8 silverado and it has a nice tone to it sounds good when your on the pedal

 

[ChevyDude84]

Is the piping after the cats 1 7/8's? prolly would be easier to get a Y pipe installed into a si/so setup?

 

[okiemudslinger]

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Airplane mufflers are loud I have a set on my F350 they are 2.5 inlet about 12" long and have about a 1.5' tailpipe and mine dump before the axle.