Rats... need a new part

[sactown]

So I'm investigating a check engine light situation on my '93 K2500 5.7L and I found this under the air filter... damn rats! I've been looking around but can't find a name for this plastic part that the tubing slides in let alone if anyone sells it. Anyone know its name and if it might be sold anywhere? Some of the wires need replacing as well, thankfully wire is easier to find.
Thanks in advance.

You must be registered for see images attach

 

[Scooterwrench]

That's the PCV elbow. Replace the whole line with 3/8" bulk fuel hose.
Hope that rat got the $hits,little *******!

 

[sactown]

That's the PCV elbow. Replace the whole line with 3/8" bulk fuel hose.
Hope that rat got the $hits,little *******!

Thanks. Yes s/he definitely crapped everywhere, had to blow and hose it out

 

[someotherguy]

Like Scoot said replace it with hose; just be sure it's emissions-rated or it will deteriorate quickly.

Dorman makes a replacement PCV tube with the elbow on it, but the rubber is poor quality and doesn't last long. Not recommended.

Richard

 

[Schurkey]

I replaced a PCV elbow on my Luminas with an orange-silicone 90 degree spark plug boot. Seen on the front cam cover, left side of photo, near Copyright symbol.

You must be registered for see images attach

Years later, still working well.

No promises on a plug boot fitting that application, though.

 

[Erik the Awful]

Dorman makes a replacement PCV tube with the elbow on it, but the rubber is poor quality and doesn't last long.

Six f***ing months. A literal piece of $#!+ would last longer. Replace it with hose.

 

[scott2093]

Six f***ing months. A literal piece of $#!+ would last longer

That would make an interesting youtube diy video...

 

[sactown]

Noted that Dorman is a POS, thanks

 

[smdk2500]

Noted that Dorman is a POS, thanks

Friends don't let friends buy dorman.