Post your lifted 2wd's!

[95C1500]

Looks good. You could go to a 32" if you really wanted to

 

[cjman250]

What kind of backspacing and offset can I run on a 4inch?

 

[Mikepitboss]

Did you do anything to the rear.

 

[Torchred]

What kind of backspacing and offset can I run on a 4inch?

My wheels are 4.5" back space but 0 offset

 

[J_lope82]

Here is my 1997. I feel like the tires look too small!?
Rough Country 4" spindle lift
31x10.50/15 BFG AT'S

You must be registered for see images attach

You must be registered for see images attach

Did you install wheels spacers on the rear?

 

[mykdee]

Did you install wheels spacers on the rear?

No I did not.

 

[cjman250]

My wheels are 4.5" back space but 0 offset

What size are they? I'm looking at some 17x8 with 4in backspacing and - 12 offset

 

[Torchred]

What size are they? I'm looking at some 17x8 with 4in backspacing and - 12 offset

17x8 4.5" backspace 0 offset. Have a 2" spacer in the back to even out the trackwidth

You must be registered for see images attach

 

[cjman250]

17x8 4.5" backspace 0 offset. Have a 2" spacer in the back to even out the trackwidth

You must be registered for see images attach

how close is it to the spindle?

 

[Torchred]

how close is it to the spindle?

Took me a minute to find it. Have a lot more clearance on this setup vs my jeep wheels with 2" spacers they poked way out but were about as close to the spindle as Scotts truck. I don't think the spindles were clearance either but I'm not 100% sure, I got them from the guy that had the white lifted 2wd 2 dr tahoe after he pulled them off.

You must be registered for see images attach