Wagonbacker9
One string banjo. Maybe 2
Finished a lil project for my son over the weekend. Its basically stuffed with go-kart parts minus the controls, brakes, and powertrain. Front end is 5/8" king pins and spindles, rear end is a 1.25" chromoly live axle and I can stand on the middle of the frame with my 200 lbs even before I bolted the tub on. Not bad for 3/4" square tube. Weighs in t 44 lbs and has a pretty wide turning radius because the rod ends hit the steering arms, but at least that keeps the tires out of the frame.
I did leave about 3" of extra axle length in the back so I can widen it out and make room for a sprocket and rotor later. I'm thinking CRF 50 drivetrain.
If anyone is interested I still have 2 full sets of wheel halves and a crap load of tires. Everything else needed can be picked up from BMI kart, Radio Flyer, and Fleet Farm.
I did leave about 3" of extra axle length in the back so I can widen it out and make room for a sprocket and rotor later. I'm thinking CRF 50 drivetrain.
If anyone is interested I still have 2 full sets of wheel halves and a crap load of tires. Everything else needed can be picked up from BMI kart, Radio Flyer, and Fleet Farm.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach