hquick
I'm Awesome
Last night I decided 'it's time'.
Pulled the front half of the exhaust out from under the Burb...along with the drivers side (passenger side) manifold.
I have a set of Camaro 4 -> 1's which I'll be 'altering' to fit.
I'm going with twin 3" stainless right through.
I've decided to buy a couple of lengths of 3" PVC pipe and some elbows/bends and mock the system up out of that (easier to lay under the Burb with a hacksaw than have to mark, cut, tack....repeat). Then I'll just copy it in stainless.
Last night I found that one of my MSD leads was ruined (seems it hadn't been plugged onto the plug properly and has caused a 'hot spot' ruining the 90deg boot).
Can anyone tell me the best place to buy the MSD cable and fittings to make a set of leads? Not entirely happy with the 'pre-made' leads.
Pulled the front half of the exhaust out from under the Burb...along with the drivers side (passenger side) manifold.
I have a set of Camaro 4 -> 1's which I'll be 'altering' to fit.
I'm going with twin 3" stainless right through.
I've decided to buy a couple of lengths of 3" PVC pipe and some elbows/bends and mock the system up out of that (easier to lay under the Burb with a hacksaw than have to mark, cut, tack....repeat). Then I'll just copy it in stainless.
Last night I found that one of my MSD leads was ruined (seems it hadn't been plugged onto the plug properly and has caused a 'hot spot' ruining the 90deg boot).
Can anyone tell me the best place to buy the MSD cable and fittings to make a set of leads? Not entirely happy with the 'pre-made' leads.