Need an installer to verify my door locks, 1998 GMC sierra

[great white]

The truck: 1998 GMC K2500 Sierra

Factory RKE.

From what I can gather and looking at wiring diagrams it's a positive triggered system and relays are already built into the system.

You must be registered for see images

[/IMG]

E is B+, C is the Factory RKE/door switches input for unlock, B is lock.

Here's the remote start/alarm for door locks:

You must be registered for see images attach

I've got the jumper set up for the second diagram.

If I'm understanding correctly, I should be able to tap the new controller lock/unlock wires into the lock/unlock wires in the kick panel and should be good to go as is.

Someone want to verify what I'm thinking is correct before I make the connections?

Going to bed and will start on it first thing in the AM....

 

[great white]

No worries, sussed it out correctly.

Factory RKE is positive trigger and I hooked directly to the factory wiring once I determined which wire was which.

(2 door vehicles without RKE are negative trigger and no relay so they need extra relays).

Works fine.

Just wanted to update in case anyone ran across it in a search.

Thread can be closed.

 

[BHBurban]

Out of curiosity, where was the factory relay located?