My new project truck: '99 K2500 Suburban

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Dravec

Unashamed 400 addict. Best. Trucks. Ever.
Joined
Sep 4, 2020
Messages
1,439
Reaction score
3,525
Location
Ft. Worth, Texas
As long as I can get the differential in by Sunday, I can have the vast majority of my list finished off by the end of next week, possibly even have her running and driving. Now that both lower control arms are (loosely) installed, the diff can be shoved back in. Once that's done, I can get all of my accessory brackets bolted on, all the accessories mounted properly, have the belt drive done, get the entirety of the cooling system in place, and all my steering linkages done. I'm getting friggin excited!!!
 

Dravec

Unashamed 400 addict. Best. Trucks. Ever.
Joined
Sep 4, 2020
Messages
1,439
Reaction score
3,525
Location
Ft. Worth, Texas
Driver's upper arm is in. Unfortunately with some dirt stuck to the lube for the bushings. Stupid thing popped out of the frame, hit the ground, and I couldn't get it all off. And I was frustrated, so it's dirty.

Edit: fat fingers
 
Last edited:
Top