After sitting on jack stands for nearly a year I made progress this past weekend after coming across a perfect donor truck. It was a low mileage c2500, and even though the rear 14 bolt is the narrower 2wd axle it was G80 and 3:73 so I couldn't pass it up. I ended up swapping the coil springs and 6 lug rotors as well. I stuck some factory wheels with 255's on temporally as they rub the spindles. The front end is pretty much wrapped up and I am now just waiting for new u-bolts and conversion u-joint and the basics should be covered.
You must be registered for see images attach
You must be registered for see images attach