Mingwro
Newbie
I love the look of my stock lower front valance on my lowered 1990 GMC Sierra SLE….however it scrapes sometimes when driving and would like to shorten 1”…does anyone sell a shortened one or is their a video on how to cut it down?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
wouldn't that take some of the rigidity out of it ? It seems like it would distort pretty easy, especially on hot days.You can just run a line using masking tape along the bottom to use as a guide and cut it with an airsaw or grinder with a thin cut off wheel if you have either. The cut off wheel could cause melting if you go too fast but with good hand control you can get a nice cut