Laredo

[SNCTMPL]

I still need to do both tranny and transfer case. I was just looking at them yesterday, I still have them bolted together, and was thinking if they were the same color it would be too much. So the transfer case will be silver and not sure on the tranny yet.

 

[Laredo]

I still need to do both tranny and transfer case. I was just looking at them yesterday, I still have them bolted together, and was thinking if they were the same color it would be too much. So the transfer case will be silver and not sure on the tranny yet.

Your contrasting chassis is actually what made me start thinking about this question.

 

[Orpedcrow]

How about Tan or Orange? Have a little party time on the underside.

 

[Laredo]

How about Tan or Orange? Have a little party time on the underside.

My approach to modifying vehicles is to make them look like they were delivered as such from the factory. I'm not sure tan or orange meets my subjective criteria.

 

[Orpedcrow]

My approach to modifying vehicles is to make them look like they were delivered as such from the factory. I'm not sure tan or orange meets my subjective criteria.

Party pooper…

I’m sure whatever you do it will be beautiful

 

[Laredo]

Today I cleaned the factory solvent tank and replaced the wire loom on the pump harness. I ordered a new pump from RockAuto (just as a precaution), but the replacement pump did not fit. So, I cleaned and reused the original pump. I then installed a new pump grommet, solvent tank tube (NOS unit purchased on eBay), and cap.

 

[Laredo]

I recently purchased an NOS evap line off eBay. Today I finally adapted the nylon segment of the NOS line to my aftermarket stainless steel line and got it installed. I'm pleased with the finished product.

 

[Laredo]

More progress from this weekend: radiator, fan shroud, and differential vent hose. I would have installed the radiator hoses but I had to paint the factory spring clamps first. They are drying now.

 

[SNCTMPL]

Looking good, you’re on the home stretch now.

 

[GrimsterGMC]

More progress from this weekend: radiator, fan shroud, and differential vent hose. I would have installed the radiator hoses but I had to paint the factory spring clamps first. They are drying now.

Meticulous detail, I love it.