great white
Retirement countdown!
- Joined
- Jan 21, 2012
- Messages
- 6,266
- Reaction score
- 210
am I the only one that thinks they look like pewp?
nope lol im with ya
I'm not a fan either but different strokes for different folks....
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
am I the only one that thinks they look like pewp?
nope lol im with ya
I just got done with this job. First door I took apart way more than I needed to, was a giant pain, and took an hour. 2nd door took 15 minutes.
I used the RockAuto cheap door handles (GM1310177, GM1311177) at $21.99 each. Shipping was 10.09. Total with 5% discount code was $51.87
I ordered the rods, clips and levers from gmparts direct. $62.40 total
QTY Part # Desc Price Total
1 *15647187 ROD $16.88 $16.88
1 *15619623 PAWL $6.07 $6.07
1 *15558837 ROD $2.95 $2.95
1 *15619622 PAWL $5.18 $5.18
1 *15647188 ROD $2.95 $2.95
2 *20633148 RETAINER $2.94 $5.88
1 *15558838 ROD $2.81 $2.81
1 SHIPPING $19.68 $19.68
For a grand total of $114.27
This was all I needed part wise. Nothing extra.
Tools list was pretty short as well
Ratchet
Long extension (6")
10mm socket
#30 Torx driver
#2 Phillips screwdriver
Flathead screwdriver with a pretty sharp point
Telescoping magnet (dropped the inside screw a dozen times)
Sturdy knife (made prying some of the clips easier)
Flashlight is optional
That was it. Remove door panel, unbolt the door handle through the access hole in the inner door. undo outside bolt. remove 3 torx head bolts from latch mechanism. Wiggle door handle out. Remove rods, swap key tumbler over to new handle using new pawl. Reassemble using new rods.
You must be registered for see images attach
I'd be happy to help out anyone in the Chattanooga area that is interested in doing this, but is a little wary of the work.
Hey Everyone,
If anyone out there wants OEM stuff with the GMT400 discount on my site the prices would be as follows for anyone here:
Handle
#15619625 RH $83.87
#15619624 LH $92.99
These "rods" are the ones that go from the lock cylinder to the door latch.
Rod
#15558837 $3.35
#15558838 $3.19
These are the rods from the handle to the latch. The one that opens the door.
Rod
#15647187 LH $19.20
#15647188 RH $3.35
Lock pawl
# 15619623 RH $6.90
# 15619622 LH $5.89
Clip
#20633148 Need Two $3.34 Each
Totaling $225.42 The shipping would be less for you guys than whatever the site says. If anyone wants to order these handles PM me and I can get an order going.
-Joe
Do you have all these parts in stock? I may be firing off a Pm to you within the next month or so to get them if so.
Sent from a 6.5 Detroit Diesel powered smartphone
Part number 15558838 and 15619622 would take me 2-3 days to get in. All other parts are one day out from me. Let me know when you want them.
-Joe
Yes, there was no rear Kodiak handles.
anybody put these on a burban?