Hey guys. i just swapped the dash in my 93 and all went well and in less than half the time i expected the swap to take. But, (lol there is always a but...) the buzzer for when my key is in the ignition is not working. i plugged everything back up and have been looking for something but havent found it yet. also some one had been in that dash before LOTS of spliced wires. there was a sound system at some point... old boss amp that had to be in the truck since before Y2K. And there was a kill switch installed that i had to bypass but besides all that it seemed ok. any ideas on the buzzer?
key buzzer not working after dash swap
- Thread starter biga1987
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Dr.Zoom
Hi Tech Redneck
- Joined
- Jun 9, 2014
- Messages
- 1,170
- Reaction score
- 201
Not seated well? Bad Module?
SlimRockett
Newbie
- Joined
- Jun 17, 2015
- Messages
- 7
- Reaction score
- 0
The dome light pin has to be hooked up on drivers side. I found this because I forgot to hook mine up last weekend I did a dash swap in mine and buzzer came on when I plugged it in.
