Curiously the 1999 service manual does not seem to have the connector in it.
Nevertheless, found it in Delphic Connection Systems Catalog, p. 58.
You must be registered for see images attach
Connector is Aptiv
12047662. Available at Mouser. You would also need to buy the TPA which is a terminal lock, either P/N
12047664 or
15324070.
Each connector uses two (2) Metri-Pack 150 female unsealed terminals. Circuit wiring is 0.8 sq. mm or 18 gauge.
Per
datasheet, terminal is an Aptiv Metri-Pack 150 P/N 12047883.
You must be registered for see images attach
However, that was superseded by P/N 12047767:
You must be registered for see images attach
Connectors and locks are available.
Terminals are available.
Wire is available. Assuming you want to match the factory color, you need 18 gauge TXL
white and
orange wire.
You can buy the connectors, locks, terminals, and wire. If you want, you can ship them to me, and I can make you the pigtail, which of course involves crimping the terminal on the wire. I have all the Kent-Moore crimpers for our GMT400s.