OBS_Trash
OBS Enthusiast
1996 Chevy C1500
I bought headlights that have the halo, also bought the combo with yellow LED’s.
I spliced the halo wires (separate from the main headlights) into the yellow “blinker” (black to black, and Green-WhT to brown.
(so the halo would run when I have it switched to 1/2 (daytime).
The halo has power and comes on fine with the daytime yellow.
Problem is if my headlight switch is 1/2 or at full headlights on, the blinker dosent blink. The only way they blink is if the lights are off. The second I turn light switch on, I get a solid blinker arrow.
hopefully someone had the same thing and can direct me. I have watched a few YT Videos and no one goes through a blinker sequence or says you have to do this a certain way.
I bought headlights that have the halo, also bought the combo with yellow LED’s.
I spliced the halo wires (separate from the main headlights) into the yellow “blinker” (black to black, and Green-WhT to brown.
(so the halo would run when I have it switched to 1/2 (daytime).
The halo has power and comes on fine with the daytime yellow.
Problem is if my headlight switch is 1/2 or at full headlights on, the blinker dosent blink. The only way they blink is if the lights are off. The second I turn light switch on, I get a solid blinker arrow.
hopefully someone had the same thing and can direct me. I have watched a few YT Videos and no one goes through a blinker sequence or says you have to do this a certain way.