Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
You must be registered for see images attach
^^^ 3" body i believe 2" blocks with crank on 36s name = bama2door
You must be registered for see images attach
You must be registered for see images attach
^^^bds with 37s name = mgrotel
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
^^^ rcx + 3" body with 38.5s
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
^^^ cepek and 36s name i believe = gatortrout
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
^^^rcx + 3" body 39.5s i believe name = Txwhitez71
You must be registered for see images attach
^^^ superlift and 315s
You must be registered for see images attach
^^^ bggrnchvy nuff said
You must be registered for see images attach
^^^ superlift and 3" body 36x15.50s on 16x10s
You must be registered for see images attach
You must be registered for see images attach
so i messed up and bought a levelling kit with keys and blocks before joining. Should i just leave the stock keys and and tighten the $hit out of em or go ahead and put them in....really just trying to clear my wheel tire combo w/o rubbing. 18'' wheels and like a 275/65/18ish maybe wider
305/60r18 should fit i'd think its only .6'' taller than a 275/65 but its like 2'' wider lol
Alot will depend on the wheel backspacing and how much you want to trim if the 305's will fit with reasonable crank.