Ginger's bagged build thread

[Ginger]

i began to bag my truck i made a few mistakes that i temp fixed, and will be going over the whole rear setup again once im done with the racecar


anyway, here it is with the bed off, and lower bars kinda in place

You must be registered for see images attach

and figuring out the panard and other linkage

You must be registered for see images attach

i had to space the front hangers out, otherwise the bag would rub the living **** out of the frame

You must be registered for see images attach

now to notch the frame, i wanted to make sure i didnt distort it at all. so i cut 2 slots in the top, and welded the notch in

You must be registered for see images attach

and example of the welds on the notch

You must be registered for see images attach

You must be registered for see images attach

then i set the bed on there to see how it looked

You must be registered for see images attach

You must be registered for see images attach

 

[Ginger]

then i started on the air system, its 2 viair 480c compressors, 2 5 gallon tanks, and some 350 3/8 valves and fittings

You must be registered for see images attach

and i por 15ed the frame, (notice my error, i didnt put gussets under the bars that the bags are mounted to. this was a mistake cuz the bars got bent to ****)

You must be registered for see images attach

You must be registered for see images attach

and the ***** sits ******* low for just having the rear done

You must be registered for see images attach

You must be registered for see images attach

thats all i have right now, once i tear it back appart, ill make some more updates