So I got some new brake shoes awhile back and thought I'd finally change them out. Looks like I have some more trouble than I thought. Seals bad somewhere or something similar? Should I just rebuild the drums or clean them off real well?
Also the axle I pulled out is covered in grease similar to this, the spline is fine though.
This all just the passenger side, haven't touched the driver side yet. I'm asking because I haven't dealt with drum brakes for years now, and have never seen one look like this.
This might be why my parking brake doesn't work after screwing with the cable forever too.
You must be registered for see images attach
You must be registered for see images attach
Also the axle I pulled out is covered in grease similar to this, the spline is fine though.
This all just the passenger side, haven't touched the driver side yet. I'm asking because I haven't dealt with drum brakes for years now, and have never seen one look like this.
This might be why my parking brake doesn't work after screwing with the cable forever too.