Recently I rebuilt my 5.7 in my '95 and I obviously cut a corner by purchasing a new distributor from eBay for about $48
Ignition Distributor For Chevy GM 350 5.7L EFI TBI TPI Vortec 5.0L RED Cap+Roto
Now it seems that I continue to get the OBD1 error code 42 (Ignition bypass circuit/control module). This will be the third time replacing. My idle is erratic and the timing is all over the place....of course !
Any suggestions on a preferred dizzy without breaking the bank?
Thanks
Ignition Distributor For Chevy GM 350 5.7L EFI TBI TPI Vortec 5.0L RED Cap+Roto
Now it seems that I continue to get the OBD1 error code 42 (Ignition bypass circuit/control module). This will be the third time replacing. My idle is erratic and the timing is all over the place....of course !
Any suggestions on a preferred dizzy without breaking the bank?
Thanks