Did my own evap valve delete

[DieselBlood]

Made my own plate to delete my evap valve and in the process of building an egr delete plate also. just wanted to clean up the engine bay some so i can eventually ls swap

Cut bottom flange off valve and sanded smooth and flat

You must be registered for see images attach

Made a cover plate from 1/4" flat stock and drilled 2 holes to fit the 2 m6x1.00 bolts

You must be registered for see images attach

Installed evap valve flange to bottom of plate with a thin layer of silicone
Then installed with 3/4" longer m6x1.00 allen head cap screws

You must be registered for see images attach

Still want to form the plate to match the valve flange better but could always do that later then put a better coat of paint on it

 

[kennythewelder]

Why ? EGR yes, but EVAP ?

 

[DieselBlood]

Why ? EGR yes, but EVAP ?

Egr is soon have to program the part for the laser to cut it out

I deleted it to clean up the clutter in the engine bay

 

[kennythewelder]

Egr is soon have to program the part for the laser to cut it out

I deleted it to clean up the clutter in the engine bay

got u.