Supercharged111
Truly Awesome
- Joined
- Aug 20, 2015
- Messages
- 12,972
- Reaction score
- 16,076
Looks like it's on too to me?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Looks like it's on too to me?
Bottom pic is mine, mounted on top.
Not a criticism, but a question... aren’t you supposed to install the coil over T-bars on top of the control arms? That’s an awful lot of spring pressure on those mounting bolts. On mine, shown below, I ground off the welded nuts and mounted it topside with nuts and bolts.
You must be registered for see images attach
Honestly I don't know but I will ask the crew at AZ Pro-performance about the mounting orientation. I don't have any pics with the box off. Interestingly, if it was installed wrong, after a good alignment the thing tracks as straight as an arrow and the brakes are amazing.
Appreciate you guys taking the time to take a look!
I was gonna ask the same thing. I have that same ALDAN set up and Figure 2 in the directions clearly have the mounting of the bottom of the coil-over on TOP of the LCA.. I can't imagine those small 3/8" bolts have the strength to carry the weight of the front end. I even have the ALDAN thrust plates for more strength.You must be registered for see images attach