Cluster plug diagram?

[fasterthanyou925]

So I started working on the new truck last night 97 scsb (I posted pics in the pic thread) and my cluster lights do not work, greaaaat. So I started ripping things apart then noticed that the lead to #14 fuse is SMOKED from the box up into the harness. I know this lead goes to the cluster, but what I need is a pinout sheet for the cluster plug, so I can bypass the wire in the harness. Otherwise, the dash comes out. Any help would be greatly appreciated. I have posted some pics to show what's going on and yes, I know I dug way too deep into taking the dash apart but I had to clean up some hack job stereo/alarm wiring.

Thanks, Tom

-smoked wire

http://i.imgur.com/5KSzxZX.jpg

http://i.imgur.com/XdrA6Pg.jpg


-I need to know which wire on this sucker is my illum wire

http://i.imgur.com/sZ4p0EL.jpg

 

[east302]

This is for a 1998, but maybe it'll help:

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[fasterthanyou925]

Thanks for the reply. I ended up getting what I needed via ALLDATA (my pop has a shop). Cut the wire at the cluster, ran it to the pink fused key on wire off the headlight switch harness. Dash lights are key on, but it works great!

 

[97hoeboy]

Old thread revival, any chance you guys have voltage/amperage/and resistance values for these wires? Working on a PnP LCD replacement clusters for these trucks, 95-00/02 is the complicated one, the 88-94 was easy

You must be registered for see images attach