James_Raatz
Newbie
Carb swapped my 350tbi and threw a th400 behind it trying to keep all interior functions and get rid of as much harness as possible. Anyone got ideas before i start tracking down wires?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Theres no problem just working on swapping over and need ideas on what to do.Whats the problem?
Whats the base truck that you swapped from?
There are plenty of factory electrical diagrams on this site.....
88-98 Service Manuals
Over the years I have collected a bunch of GM service literature. Links to PDF Scans of service and STG manuals and a links to the Parts manuals. You'll need the FREE Adobe Acrobat reader to open these files. Get it directly from Adobe here {http://get.adobe.com/reader/} If you're not...www.gmt400.com
And yea, tracking down the wires with a multimeter is generally a good start for electrical problems. If you still have a complete wiring harness without any clipped wires then the plug ends can tell you anything you need to know.