rook
I'm Awesome
Knuckle Dragger is correct "You should have power on both sides. Power on one side is a defective switch"
this is true if you check it with the plug connected.if the pressure is too low to work the switch,paper clip or jumper the plug to get it going or just to check the clutch. breaking out the volt meter is more than likely going to be you best bet. unplug the compressor and unplug the switch turn on the ac from the controls in the vehicle check the low side plug for voltage at the switch/plug (the connector on the receiver/dryer) if it hs 12 volts jump it out then check the compressor plug then check it for voltage.
Perfect, yes - this is what I was hoping to get back. Thanks - I’ll check it tonight when I’m home.
Sent from my iPhone using Tapatalk