AuroraGirl
I'm Awesome
You must be registered for see images attach
My radiator on the driver side has jumped out of the place where it usually sits with a bushing on the bottom... i can say ive NEVER seen that before.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I will tomorrow when its warm and not dark but its still like.. wtf.Well, remove as needed and inspect.
It has a single clutch fan and just a shroud. The weird part is they bolt the radiator to the core support at the top, and to me, unless the plastic that retains the top of the radiator was bad i dont see how it could have gotten out of that slot. But Ill get in there tomorrrow and take a look. im defintely taking pictures because wtf!Looks like something got a bit twisted and/or broken off? Never had the radiator out of the Denali but the construction looks similar to my old Dodge Intrepid. Those mounts are supposed to in the appropriate holes, but obviously something happened for it not to be! Does this truck have electric fans or a clutch fan on the water pump? On ours the e-fans were mounted in the shroud and that helped hold the radiator in place.
If it didn't break, maybe something else broke, to let the rubber thingy come out(I saw your post on this on the square body forum too).Looking at new radiators, it looks like they've got a nub like mount on each side that sits in place. I'd think it's a pretty good possibility one of the plastic mounts broke off.
Its never been out, i even confirmed it with my step dad (First and only other owner)My guess is that last time it was apart a cushion or rubber piece was lost allowing for up and down movement even with the rad cover bolt tightened.