Hey all. So i did the seafoam treatment today on my 99 obs k1500 burb with the 5.7 with the can that has the spray hose attached to it. Watched the youtube videos and got er done. It only smoked for about 3 blocks then cleared up. Im assuming thats a good thing meaning the engine didn’t have much carbon build up or its just that bad it didnt do anything. About 2 weeks ago i used the can of seafoam with the brake booster vac hose and did a full bottle but it didnt hardly smoke then either. Am i doing it wrong?
The reason Ive been doing this because it has no go from a stop and rough idle. Sometimes it sounds cammed on first start unless its cold then it starts and runs fine. I cant even bark the tires in the shop on a wet floor and when you floor it from a stop it just boggs down. Its had a full tune up fuel filter cats removed and o2 sensors replaced( no check engine light either lol)and im trying to avoid the fuel spyder replacement cause i cant afford it but im thinking it will have to be done.
Sent from my iPhone using Tapatalk
The reason Ive been doing this because it has no go from a stop and rough idle. Sometimes it sounds cammed on first start unless its cold then it starts and runs fine. I cant even bark the tires in the shop on a wet floor and when you floor it from a stop it just boggs down. Its had a full tune up fuel filter cats removed and o2 sensors replaced( no check engine light either lol)and im trying to avoid the fuel spyder replacement cause i cant afford it but im thinking it will have to be done.
Sent from my iPhone using Tapatalk