Disney
Newbie
I'd skip the SBC altogether and go with a newer 5.3.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Im not sure what your budget is, but with the HT383E being about $5k, and most of these blue print engines being above $4k, I would consider a new GM Vortec 4 bolt crate engine. Part number 12530283. It can be picked up for around $2000. These vortec 350's made decent power and are super reliable and come with a good warranty. Another thing to keep in mind is the power rating. When these built crate engines such as the ones from blueprint are dyno'd they are usually giving the gross power ratings(no accessories, no exhaust system) where as the Vortec crate being rated at 255HP and 335 Ft-lb is a net rating(full accessories, drive belts, and full exhaust). If you were to throw one of those engines on a dyno and record gross ratings the HP would be close to 300HP. So you have to ask if spending double is worth an extra 30ish horsepower. If you want to spend over $4k, i am willing to bet this crate for $2K, plus a Weiand 142 for $2k would outpower the blueprint 383.
Yeah, my 94 z71 got a front/ rear main leak that’s been leaking slowly for going on 4 years and a knock (that’s getting worse) at start up and a valve seal leak (puff a white smoke when it’s first cranked up) but I’m still driving it daily to work, etc, and I still can’t decide on what Im going to do on a replacement motor either Goin blueprint or GM crate 350 or idk, I’m leaning towards a GM crate being as I use it daily and would prefer good gas mileage, I’m still up in the air on what to do ....I also heard you can the newer style GM crate 96 up vortec heads motor and use it in my truck with just putting a tbi conversion intake on it but I don’t have that confirmed either so.....
Yes you can do that, but many say that the GM TBI to Vortec intake is way overpriced for what it does. You can buy a Vortec head carb intake and a TBI adapter for a lot less that the GM intake. It would benefit from a tune too to get the most out of those heads and roller cam.