frydlittlman
Newbie
O.K. I'll give y'all the short version.
1997 350 Vortec L31 Heads
One day out of the blue instead of roaring to life when I barely turned the key, I started needing to turn the key on/off repeatedly to build pressure, (most likely due to pump slowly dying or bad fuel) yet she would still turn over pop like it was trying to start. Couple weeks later it won't even turn over! Pulled plugs, yanked the belt off to make it easier and I couldn't even turn it over by hand with a breaker bar or prying on the flywheel! Please tell me there's a sway to bust this loose without requiring a new motor! Any help is definitely appreciated!
Thanks in Advance.
1997 350 Vortec L31 Heads
One day out of the blue instead of roaring to life when I barely turned the key, I started needing to turn the key on/off repeatedly to build pressure, (most likely due to pump slowly dying or bad fuel) yet she would still turn over pop like it was trying to start. Couple weeks later it won't even turn over! Pulled plugs, yanked the belt off to make it easier and I couldn't even turn it over by hand with a breaker bar or prying on the flywheel! Please tell me there's a sway to bust this loose without requiring a new motor! Any help is definitely appreciated!
Thanks in Advance.