95obschevy Build Thread

[camoburban]

What's the difference in the newer washer reservoir from the old one?

 

[95obschevy]

Mine was up on the fender well. I think in 96 or so they switched to the more hidden type low on the fender by the core support

 

[Sampuppy1]

Yeah that was 96. It sits under the second battery tray/storage box/empty space

sent from a likely flagged smartphone.

 

[95obschevy]

New motor is almost ready. Need to have an exhaust manifold bolt removed from the drivers side head (must be a common thing on these motors) last one was in the same spot. Going to run 6an fuel line this time. Repulley to a 4.50 for 8-9 lbs instead of 10 to be safe. Still need to get a catch can setup for the pcv and some odds and ends. Wanting to dyno tune it this time. Guess well see how it goes.

You must be registered for see images

 

[95obschevy]

You must be registered for see images

You must be registered for see images attach

 

[camoburban]

I got one of those reservoirs and the tray from the junk yard. Just haven't put it in yet.

 

[95obschevy]

Making progress..new motor is in. New injectors are in. Engine bay is all clean as well

You must be registered for see images attach

You must be registered for see images

You must be registered for see images

 

[Sampuppy1]

Let's hope for some better luck this go round.

sent from a likely flagged smartphone.

 

[95obschevy]

Ive got my fingers crossed lol

 

[95obschevy]

You must be registered for see images