95 GMC SIERRA RCSB

[HRV-LS1]

GOT MY TRUCK IN LATE JANUARY. 95 GMC SIERRA REGULAR CAB, SHORTBED. GOING TO INSTALL AN LM7 INTO IT. HERE GOES....

 

[bent]

Keep us informed I am also gathering stuff to swap a lq4 into a 92. Starting this summer any info you have will be greatly appreciated. I have been reading and learned alot on this site and lt1swap.com

 

[HRV-LS1]

Would like to place photos to my thread. Can someone guide me through the steps? I've tried photobucket and can't get it to work. Thanks.

 

[am92]

Just replied on your other post...PICTURES NOW!!! lol

 

[HRV-LS1]

Tried photobucket again, doesn't work. I copied the picture, but when tried to paste, the paste isn't highlighted, so its not working. Does photobucket and this site have to be on at the same time to transfer photos? Still need help with this.

 

[HRV-LS1]

You must be registered for see images attach

Here's my truck. Finally got photobucket to work.

 

[HRV-LS1]

You must be registered for see images attach

This is the original engine, a 305. The engine has 220,000 miles on it. Time for an updated engine,
the Lm7.

 

[HRV-LS1]

You must be registered for see images attach

This is the LM7 I got from the junkyard. They told me it had 45k miles on it. Who's to believe them. Anyway, went to do a compression check on it. Had readings of left bank 150,150,150,150 right bank 120, 120, 120, 90. I didn't like those readings at all, so I got myself a
remanufactured block from rockauto. Now I know that my block is good, I transfered the parts to the reman. block.

 

[am92]

Clean truck! And it should be tons of fun with a the 5.3 in it!

 

[HRV-LS1]

You must be registered for see images attach

Began removing what was needed. Had to remove the radiator support, for my garage ceiling is too
low. Took some work,but got it all out.