mattjslaunwhite
OBS Enthusiast
hey, new to the site, not new to these trucks lol, bought a 95 silverado c1500 reg cab long box 2wd from a freind for $540 ca, cab and bed are in great shape, a few spots on the frame are bad but its getting swapped anyways
got stock 350 TBI, only thing done was the filter cover was flipped
the bad: needs pitman arm and idler arm replaced, both new ones came with truck and once the snow melts a bit outside ill swap them in
-both rear cab-mounts need to replaced, i usually use 1/4 steel plate and weld up new ones
-both fenders replaced, pass side is rotted around the 'well and the drivers side is damaged (see below)
-driver side door. the guy i got it from backed into a snow bank with the door open and destroyed the door/fender, his solution was to drive some screws into it and perm shut it, i got it to open and not catch to badly, got tired of crawling out the pass side lol
inspections good til may 2015
plans:
-im gonna be building up a complete 4wd frame and a rebuilt motor. , starting with a k2500 frame, picking up a second 350 tb and redoing all the internals myself, 3" susp lift + 2" body lift and a set of either 33's or 35's i haven't fully decided yet. then ill be swapping my cab and bed over to it.
work will be here and there as at the same time im building up a 03 Saturn ion and renovating a 1978 mobile home
got stock 350 TBI, only thing done was the filter cover was flipped
the bad: needs pitman arm and idler arm replaced, both new ones came with truck and once the snow melts a bit outside ill swap them in
-both rear cab-mounts need to replaced, i usually use 1/4 steel plate and weld up new ones
-both fenders replaced, pass side is rotted around the 'well and the drivers side is damaged (see below)
-driver side door. the guy i got it from backed into a snow bank with the door open and destroyed the door/fender, his solution was to drive some screws into it and perm shut it, i got it to open and not catch to badly, got tired of crawling out the pass side lol
inspections good til may 2015
plans:
-im gonna be building up a complete 4wd frame and a rebuilt motor. , starting with a k2500 frame, picking up a second 350 tb and redoing all the internals myself, 3" susp lift + 2" body lift and a set of either 33's or 35's i haven't fully decided yet. then ill be swapping my cab and bed over to it.
work will be here and there as at the same time im building up a 03 Saturn ion and renovating a 1978 mobile home
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach