TacosnBeer
I'm Awesome
You must be registered for see images attach
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Wow 17psi, that's high enough for idle. No weeds in the engine either :-DAfter that, had to prime the motor with my magic homemade primer tool... I was able to pump 4qts of oil in and push the gauge to 17psi with this setup... rotated the crank little by little till all the rockers had oil.
You must be registered for see images attachYou must be registered for see images attach
Yessir! I rotated it by hand until all the rockers had oil dripping. I could have put an air fitting on the bottle to get more pressure but, that was enough to make sure the gauge works and the motor is primed for the first start after sitting. It worked out really well. To hell with the $300 primer bottles...Wow 17psi, that's high enough for idle. No weeds in the engine either :-D