454SS fog lights

[sewlow]

Just got my new 454SS lower valance & the factory lights. Can't wait to put 'em on! Is it possible to wire these into the factory fog light switch?
There's a bunch of wires coming out of the back of the swaitch. More than the 'power & ground' wires that I would expect.

 

[TruckinAin4Sissies]

What year? I'll see if I have a diagram for ya.

 

[TruckinAin4Sissies]

I figured it was an 89-91 (SS)
#6
Part # 12072875 * HARNESS, FRONT FOG LAMP SWITCH WIRING (1989-91 W/BYP)

#16
Part # 15602693 * SWITCH, FOG LAMP (1989 W/BYP)
OR
Part # 15607065 * SWITCH, FOG LAMP (1990-91 W/BYP)(ACDelco #D1532C)

You must be registered for see images attach

Here's a good one:

You must be registered for see images attach

001 15602693 * SWITCH, FOG LAMP (1989)

001 15607065 * SWITCH, FOG LAMP (1990-91)(ACDelco #D1532C)

002 12072875 * HARNESS, FRT FOG LAMP SWITCH WIRING

003 03816659 * RETAINER, PLASTIC 7 INCH ADJUSTABLE STRAP

004 12088594 * RELAY, FOG LAMP(ACDelco #12088594)

005 15551631 * BRACKET, HEADLAMP & FOG LAMP RELAY

006 12072801 * HARNESS, FORWARD LAMP WIRING (1990-91 W/SPORT PERFORMANCE PACKAGE B4U)

006 12072824 * HARNESS, FORWARD LAMP WIRING (1990-91 EXC SPORT PERFORMANCE PACKAGE B4U)

006 12072874 * HARNESS, FORWARD LAMP WIRING (1989)

007 10030367 PART OF #24, LAMP PACKAGE.

* NUT, FRT FOG LAMP ADJUSTING(*1)

008 Not Avail. * BRACKET, FOG LAMP MOUNTING-LH(*1)

008 Not Avail. * BRACKET, FOG LAMP MOUNTING-RH(*1)

009 12338067 PART OF #24, LAMP PACKAGE.

* BOLT, FRT FOG LAMP(*1)

010 16512141 PART OF #24, LAMP PACKAGE.

* CONNECTOR, W/WIRING, FOG LAMP(*1)

011 03816659 PART OF #24, LAMP PACKAGE.

* RETAINER, PLASTIC 7 INCH ADJUSTABLE STRAP(*1)

012 16504497 PART OF #24, LAMP PACKAGE.

* SEAL, FOG LP(*1)

013 16503526 PART OF #24, LAMP PACKAGE.

* HOUSING, FOG LAMP(*1)

014 16502951 PART OF #24, LAMP PACKAGE.

* RETAINER, FOG LAMP WIRE(*1)

015 11513798 PART OF #24, LAMP PACKAGE.

* BULB, W/TERMINAL, FOG LAMP (HALOGEN)(*1)(ACDelco #H3)

016 16502952 PART OF #24, LAMP PACKAGE.

* CAP, FOG LAMP END(*1)

017 12338116 PART OF #24, LAMP PACKAGE.

* BOLT,FRT FOG LP RET(*1)

018 16502945 PART OF #24, LAMP PACKAGE.

* LENS, W/REFLECTOR, FOG LAMP(*1)

019 10031825 PART OF #24, LAMP PACKAGE.

* BOLT, FRT FOG LAMP ADJUSTING(*1)

020 12337881 PART OF #24, LAMP PACKAGE.

* SPRING, FRT FOG LAMP ADJUSTING(*1)

021 10030710 PART OF #24, LAMP PACKAGE.

* NUT, FRT FOG LAMP(*1)

022 16509695 PART OF #24, LAMP PACKAGE.

* SPACER, FRT FOG LAMP MOUNTING(*1)

023 11514623 * BOLT, HEX W/CON WASHER (M6X1X20, 9.8)

024 16524927 * LAMP,FRT FOG(LH)(INCL ITEMS #7-22)

024 16524928 * LAMP,FRT FOG(RH)(INCL ITEMS #7-22)

 

[shortchevy]

Just got my new 454SS lower valance & the factory lights. Can't wait to put 'em on! Is it possible to wire these into the factory fog light switch?
There's a bunch of wires coming out of the back of the swaitch. More than the 'power & ground' wires that I would expect.

fog lights arnt exclusive to 454ss's .... the factory ones are wired to only go on when your running lights are on and the switch is lighted... so... power,ground,dash light?

 

[sewlow]

Wow, TA4S, that's the kind of diagram I'm looking for, but I'll have to post a pic of what I have.
I have a '98, & a factory switch that was a wrecker find. Goes between the cluster & radio, above the cargo light switch.
The spoiler is an aftermarket, with precut holes, & the lights are after-market repro's. And, other than some 130w bulbs to be installed that's ALL i've got. So I'll have to make all the wiring. I'll post a pick of the backside of the switch tomorrow.

 

[shortchevy]

Wow, TA4S, that's the kind of diagram I'm looking for, but I'll have to post a pic of what I have.
I have a '98, & a factory switch that was a wrecker find. Goes between the cluster & radio, above the cargo light switch.
The spoiler is an aftermarket, with precut holes, & the lights are after-market repro's. And, other than some 130w bulbs to be installed that's ALL i've got. So I'll have to make all the wiring. I'll post a pick of the backside of the switch tomorrow.

your placement is incorrect. the factory switch goes right next to the cd player, below the airbag switch. I just took my switch out and I have 6 wires going into the switch. heres some pictures. I hope they help.

You must be registered for see images attach

You must be registered for see images attach

 

[JollyGreen]

What is that fog light switch out of? That is exactly what I want to mount above my cargo light switch since i can't put it where yours is.

 

[sewlow]

Mine was a wrecker find. Late '90's SUV GMT 400. Batteries in my camera are dead. Have to charge 'em overnight. Post pix tomorrow.

Actually, now that I think about it. I got just the switch from the wreckers, & then I had to get the whole mounting plate that all 3 switches fit into. That's the airbag keyed switch, the cargo lamp switch & the one for the fog lights. I got the switch out of a 4X4 suv & they have a Hi/Lo switch for 4 wheel drive where Shortchevy has his fog light switch. I didn't know that there was a different spot to mount it, so I mounted it where I got it out of the donor truck.

 

[sewlow]

So, it only took me 2 weeks to get around to this, but here's some pix of what I'm messing with.
I located the switch where I did, because the vehicle that I got the switch out of was a 4X4, & the lower position is occupied by the switches required for those trucks. I put it in the same position as the truck that it came out of. Didn't realize there were alternate places for it.
The internal bracket that mounts all 3 switches was a stealership purchase. Cheap.
I have no idea what wires are for what. Functionally electronically illiterate.
Any ideas? Clues? Suggestions? Smart-ass comments?

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[TruckinAin4Sissies]

Year make and model of the donor vehicle. Vin & RPO's would help immensely.