35's on a 6in lift with no body lift?

[shakermaker]

My truck was lifted a couple years ago and I have yet to buy new tires. It's a used kit from a mechanic friend that was putting a newer lift on his truck. It's a Rancho adjustable Suspension kit set at 6''. There is no body lift installed. I think I can easily fit a 315 all terrain tire on this. I'm not sure if it would rub or be a tight fit. What do you think? Thanks. I'm thinking about the popular BFG all terrain ta.

I am not an expert on lift kits so I apologize if this sounds like a stupid question.

http://s1044.photobucket.com/user/supersonicshakermaker/media/2_zps5ckszxcn.jpg.html?sort=3&o=0

http://s1044.photobucket.com/user/supersonicshakermaker/media/4_zpsqfixekyq.jpg.html?sort=3&o=1

http://s1044.photobucket.com/user/supersonicshakermaker/media/3_zpsswtj8tvh.jpg.html?sort=3&o=2

http://s1044.photobucket.com/user/supersonicshakermaker/media/1_zpsmoa1i0a0.jpg.html?sort=3&o=3

 

[kkirwan71]

I don't see why not. You can stuff 35s on a crank

Sent from my SM-G900V using Tapatalk

 

[thz71]

Easily

 

[kkirwan71]

Taylor has spoken

Sent from my SM-G900V using Tapatalk

 

[SkyHighColorado]

meh I rubbed my 35's on only 6" offroading.

 

[thz71]

The recommended size from the manufacturer is 35s. They're always VERY conservative on stuff like that. 35s is the minimum tire size I'd run on a 6" lift.

 

[SkyHighColorado]

Procomp instructions state not to run bigger than 33" iirc.

 

[thz71]

Procomp instructions state not to run bigger than 33" iirc.

Hard to believe. 33s are recommended in 3 inch body lifts

 

[shakermaker]

And will this tire fit my stock wheels?

http://www.ebay.com/itm/181827401000?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT

 

[kkirwan71]

Yes

Sent from my SM-G900V using Tapatalk