Stepside_fever95
I'm Awesome
I installed a 340lph Quantum fuel pump last night into my 1999 K1500 Suburban Delphi canister. The install went very smoothly and I decided to pull the brass venturi pump barb out of the delphi pump and install it into the new pump.
It works very well, but it is sucking the bucket dry after WOT for around 7 seconds. I'm not sure if this is because of the venturi pump or what. I may drop the tank again and remove the barb and line for the venturi pump to see how it does. Any other suggestions? I don't really like the idea of cutting up my fuel bucket and not being able to run below a quarter tank.
Quantum does offer the same pump as a drop in assembly with a canister of their own design that does away with the venturi setup. Worst case I'll just swap it out for that if I cant figure something out.
It works very well, but it is sucking the bucket dry after WOT for around 7 seconds. I'm not sure if this is because of the venturi pump or what. I may drop the tank again and remove the barb and line for the venturi pump to see how it does. Any other suggestions? I don't really like the idea of cutting up my fuel bucket and not being able to run below a quarter tank.
Quantum does offer the same pump as a drop in assembly with a canister of their own design that does away with the venturi setup. Worst case I'll just swap it out for that if I cant figure something out.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach