95six.five
I'm Awesome
It's 8 lug :/
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Removing the lower rad shroud will also cause cooling issues. The shroud is an integral part of the clutch fan cooling system. It makes the fan draw through the rad rather then just beat air around the engine bay.
However, 65 TDs really only have issues with cooling when towing.
That doesn't sound like something the OP is intending to do so body lift away.
Or, use some drop brackets for the rad and shroud. That would likely require a touch of fabrication work to keep the upper shroud and you may have to cut/weld the lower rad support channel to keep it properly orientated with the clutch fan.
Or, another option is to use electric fans if you don't plan to tow with it.
My preference would be to modify the core support to keep the shroud or just go with a full coverage electric setup.
Do electric fans pull enough CFM for a Diesel? If i recall right another option is extending the shroud...i think it was outaline that suggested that.
the fabtech spindles aren't discontinued!!!
i have them on mine.
here are spindles and 2" block on 35's w/ h2 rims. on my cclb 6.5td
i had to post a link the pic was toobig.
https://www.facebook.com/photo.php?fbid=1460806754051&set=a.1518878925819.73099.1049890137&type=3&src=https%3A%2F%2Fsphotos-b.xx.fbcdn.net%2Fhphotos-ash3%2F37822_1460806754051_2539667_n.jpg&size=720%2C540
Do you like the fabtech spindles? were the pretty simple to install? The pic says the content is unavailable...
the fabtech spindles aren't discontinued!!!
i have them on mine.
here are spindles and 2" block on 35's w/ h2 rims. on my cclb 6.5td
i had to post a link the pic was toobig.
https://www.facebook.com/photo.php?fbid=1460806754051&set=a.1518878925819.73099.1049890137&type=3&src=https%3A%2F%2Fsphotos-b.xx.fbcdn.net%2Fhphotos-ash3%2F37822_1460806754051_2539667_n.jpg&size=720%2C540
yeah love them, and took me about 4hrs to install but i did all new bearing and rotors when i put them on.
hmm.... try this
You must be registered for see images