FLGS400
I'm Awesome
Tonight I was able to finish up the exhaust system. It's new from where the converter used to be, all the way out the back. Whoever took off the converter (God knows who and when), welded in a 2.5" diameter pipe, in between the 3" sections. All the 3" pipe is Walker products, as are some of the clamps and all the brackets. The muffler is a Cherry Bomb Salute, single 3" in and dual 2.5" out. The tail pipes are Flowmaster 2.5" dia. I used a stock type hanger for the left tail pipe, that I got on one of my EZ Pull excursions a couple weeks ago.
Over-all, it wasn't extremely difficult to do. I did have cut down some of the 3" pipes, modify the muffler hanger bracket, and modify the left tail pipe. The tail pipes exit in the same spot on both sides, but sit a different levels leading up to that point. My goal was to keep the tail pipes as high as possible over the rear differential. When I did the cnotch, I had cut a lot of the bed brace, in order to get the tail pipes up higher in the future. I think Flowmaster designed these tail pipes for trucks that are at stock ride height or only lowered a couple inches in the rear.
Some time over the course of the next couple days, I'll take it for a drive. I need to put some fresh gas in it anyway.
Here are some pictures:
Over-all, it wasn't extremely difficult to do. I did have cut down some of the 3" pipes, modify the muffler hanger bracket, and modify the left tail pipe. The tail pipes exit in the same spot on both sides, but sit a different levels leading up to that point. My goal was to keep the tail pipes as high as possible over the rear differential. When I did the cnotch, I had cut a lot of the bed brace, in order to get the tail pipes up higher in the future. I think Flowmaster designed these tail pipes for trucks that are at stock ride height or only lowered a couple inches in the rear.
Some time over the course of the next couple days, I'll take it for a drive. I need to put some fresh gas in it anyway.
Here are some pictures:
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Last edited: