Half Assed
WINNERS NEVER LIFT
I just needed to figure out something for the brake pedal rod.
The van's rod is a tad too short to thread the end. I have to cut and weld on the rod from the vacuum booster.
Looks like I need to be 11" exactly to center.
The van's rod was 3/8" so i drilled a 3/8 hole in the truck's rod.
11" with some adjustment from the threaded section.
Right now it's with a friend to get welded. I don't think my 110v welder would have gotten it hot enough so I'm having someone else do it.
I already bought new power steering pressure lines, so I just need some 3/8" p/s hose and a T-fitting for the return line to hook it up. Then decide what master cylinder to go with. The one in the truck was replaced with the wrong one (3/4 ton light duty). The heavier duty 3/4 ton master will probably work, or go with the one for the express van...
The van's rod is a tad too short to thread the end. I have to cut and weld on the rod from the vacuum booster.
Looks like I need to be 11" exactly to center.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
The van's rod was 3/8" so i drilled a 3/8 hole in the truck's rod.
You must be registered for see images attach
11" with some adjustment from the threaded section.
You must be registered for see images attach
Right now it's with a friend to get welded. I don't think my 110v welder would have gotten it hot enough so I'm having someone else do it.
I already bought new power steering pressure lines, so I just need some 3/8" p/s hose and a T-fitting for the return line to hook it up. Then decide what master cylinder to go with. The one in the truck was replaced with the wrong one (3/4 ton light duty). The heavier duty 3/4 ton master will probably work, or go with the one for the express van...