Disclaimer: Links on this page pointing
to Amazon, eBay and other sites may include affiliate code. If you click them and
make a purchase, we may earn a small commission.
I've got a 1995 1/2 ton Chevy with a 6 inch Rcx lift. I'm looking at doing a 1 ton front differential and rear swap but I don't know if the front differential will fit with the lift kit. Anybody know if that will work?
Does't work. All the mounts are different, CV bolt pattern is different, CVs different lengths, different knuckles, different hubs, different UCAs, different ball joint taper... Everything.
If you want 1 tons you need to look for a Dana 60 front.