Search results

  1. H

    LMC Doors

    Has anyone on here used LMC Full door shells? I need a set of doors for the truck I'm building and was wondering if they were of good quality or not. Rust free doors are hard to come by up here in New England. Thoughts?
  2. H

    Vortec fuel Pumps

    So in may of last year I put in a new acdelco fuel pump and a new gas tank. and now it's time to do it again 11 months later. Pump is noisy and I only have 50psi of pressure. I'm definitely not very interested in another Delco pump so what do you guys recommend? Thanks guys.
  3. H

    Removing Window Regulator

    So I did a quick search about removing the regulator and it seems straight forward however everyone says to completely lower the window. The regulator in my truck managed to bend itself and will not let my window fully go down and I'm afraid of it breaking the window. So if I have someone hold...
  4. H

    Air Bags

    So I recently crashed my truck put the whole nose back together but now on to the hard part. In the crash I blew both airbags, I have a full parts truck and have already removed both bags out of the parts truck. I've been told that there is an airbag module I will need to replace. I can't find...
  5. H

    Radiator Core Support Frame Brackets?

    So I was in a collision with my 98 1500 and upon tear down today I noticed that the support at the very front of the frame the one that holds the core support up is broken. It's the one at the very front has the 3 bolts going into the frame and 2 for the bumper it has a rubber body mount that...
  6. H

    Mode Door

    Hey guys so my 98 1500 is having some trouble with selecting where the heat and AC come out. I can switch back and forth from heat to AC no problem but when i try and change where it comes out it will only go full blast on defrost and floor i cannot get it to come out the front vents. I don't...
  7. H

    Crate Motor

    So as some of you guys might of saw the motor came apart in my truck and im going to put a crate motor in. However, i am not sure if my 98 1500 4wd l31 is a 4 bolt or a 2 bolt main, i was planning on switching to a 4 bolt main and 1 piece rear main seal. This says the application is chevy full...
  8. H

    Vortec Swap

    So something happened with my motor and i ended up getting a great deal of coolant into the oil and it developed a pretty good rap on the drivers side so im thinking of pulling the trigger on a crate motor from summit. Seems pretty straightforward everything should be bolt right in as its the...
  9. H

    Vortec Fuel Pressure

    I searched but couldnt really find anything on what is the normal fuel pressure for a 98 vortec 350. My truck has no power above 1/4 throttle so i measured the fuel pressure and i have about 50psi at idle and no increase with throttle. I checked the pressure at the schrader valve right above the...
  10. H

    Coolant Lines on a Vortec

    So for a while i have had a loss of antifreeze and a build up at the intake. I figured it was intake gaskets so i was driving it today i got home and noticed some steam from the hood i popped it and saw a line connecting to my intake had a little smoke coming from it and some build up so i...
  11. H

    Removable Bell housing?

    I saw a rebuilt 4l60e for a 97-06 that featured a removable bellhousing, i have a 98 and broke the bellhousing does the 98 4l60e have a removable one or not?
  12. H

    Where do you buy your sheetmetal parts?

    So my truck is a ext cab with a 3rd door and on the passenger side i need the whole rocker (Under pass door and 3rd door) and a cab corner. I was just wondering if you guys have been in the same position and where you bought your sheet metal from. I priced it out on LMC i just wasn't sure if you...
  13. H

    Torsion Bars swap?

    Ive tried looking into it but couldn't find any info on it. I have a 1500 with a 7.5 fisher plow on it and i get some sag in the front end when i have it on and i was wondering if 2500 torsion bars would swap into the 1500 to stiffen up the front end and hold the plow better. Might not even be...
  14. H

    List of codes.

    Hey guys I have a 98 1500 4l60e I have a transmission issue. I scanned the codes and they were P0740 TCC Circuit Malfunction P0785 Shift Timing Solenoid P1860 My tach goes out and the light under the PRND321 Gear selector flickers or goes out. The trans goes into limp home mode when it is...
  15. H

    From Boston

    Hey guys, figured id make an intro thread because im gonna be here for a while. Im a 16yr old welder attending a technical highschool. I drive a 98 1500 ECSS. z71 3.73's 350 130k. I received the truck from a family member for free. He told me you always will remember your first car and hes gotta...

Latest posts

Staff online

Members online

... and 6 more.
Total: 1,707 (members: 56, guests: 1,651)

Forum statistics

Threads
64,711
Messages
1,399,325
Members
52,290
Latest member
Jwoudstra

Share this page

Top