Search results

  1. C

    My bagged ECSB project.

    Just finished it up not too long ago. Il upload more pics of it tonight. On to the good stuff it's a 96 silverado. I LS swapped it about a year ago. I finally was able to bag it this winter. It's a pretty simple setup. It's a 2 link with panhard bar in the rear. The front I customized the djm...
  2. C

    Gas tank issues need some help.

    Before anyone blasts me for this I've looked high and low for it. But with a bagged ext cab. How bad does the gas tank hang below the frame?
  3. C

    bagged front end. shock question.

    So I finished up bagging the front of my 96. And I mounted the wheels to check clearances and what not. My delima is my shocks.... I only get about 3/4 of revolution on the steering wheel before my tires hit the lower shock mount on the control arm. Does anyone have any advice or pictures I...
  4. C

    Tire size and air ride question

    Hello everyone. I'm getting ready to bag my silverado. My question is with my wheel and tire combo. I have 225/65/17s. How big of tire can you run before you have to tub the firewall. My truck isn't going to be body dropped.... Yet haha.
  5. C

    drop spindle question.

    So I'm keeping my truck static this spring. I want to put drop spindles on it. But I have drop lower control arms. Am I able to run drop control arms with drop spindles on 15's?
  6. C

    cant get my shift cable to line back up with my trans..

    Alright so I had to replace my park neutral switch on my 4l60e throw it on snap the cable on go to change gears and snap! The ball and socket joint next to trans breaks. So I go pull a cable off a truck at the junkyard throw it in mine and its off quite a bit. Is there a certain way to put this...
  7. C

    96 fuel guage after ls swap?

    is it possible for me to get the factory fuel guage to work after doing the ls swap. I know when it had the 5.7 in it the fuel level was calculated through the ECU. I have deleted the factory computer and just have the ls computer in it. any help would be greatly appreciated I really don't want...
  8. C

    ls swap upper radiartor hose?

    what upper radiator hose do i use? the factory ls upper radiator will not fit my truck it is to short. i dont know which hose you guys are running. i am keeping the factory clutch fan on it just to save me some money for the time being. any help would be greatly appreciated this is the last...
  9. C

    pictures of ls swap wirh f body oil pan

    Im currently swapping my 1500part right now and the last piece of the puzzle I need to figure out is oil pan clearance. I know f body pans will have more clearance then any other pan but ny how much? Would like to see some pics of this oil pan in a gmt400. My os going to be bagged by this coming...
  10. C

    tach signal wire on my 96?

    I know that it's the white wire on the coil. But there is a white wire on the 3 wire plug that plugs into the coil. Then a 4 wire plug with a white wire in it as well. Which plug has the signal wire for the tach. Any help will be greatly appreciated!
  11. C

    which bundle of wires on firewall go to the gauage cluster? 96 1500.

    i go a 96 1500 that im currently swapping a 5.3 lm7 in. I need to know which bundle of wires go to the gauage cluster. so I can pull which sensors I need from the original wiring harness. oil pressure, water temp, tach , etc..
  12. C

    which plug on firewall has signals wired for gauage cluster?

    i go a 96 1500 that im currently swapping a 5.3 lm7 in. I need to know which bundle of wires go to the gauage cluster. so I can pull which sensors I need from the original wiring harness. oil pressure, water temp, tach , etc..
  13. C

    h3 hummer oil pan lsx swap.

    I know people run the f body oil pan when they ls swap the r e 88-98 for the ground clearance. But has anyone used a h3 hummer oil pan or know of anyone that has used it?
  14. C

    will 67 impala rear shocks work eith 7" drop?

    Just like the title says. I see people running them on 6" drop.
  15. C

    shocks for 5/7 or 6/8 drop? what to get?

    I looked through the shock thread and couldn't find anything. I was looking to buy nitro drop 2's. But I heard they wear out fast. This is my first OBS so any advice will be thankful.
  16. C

    what shocks to get for 5/7 drop?

    Im need to know what shocks to run on a 5/7 or 6/8 drop. This is my first OBS so any suggestions will be thankful.
  17. C

    96 5.7 falls on its 3kthe rpm.

    Recently noticed has developed a dead at around 3k rpm under hard acceleration. Its bone stock minus a k&n drop in filter. It only does it in first doesn't do it in any other gear. Anybody have any ideas as to what it could be?
  18. C

    where can i find a 3 bolt grant adapter for my 96

    just like the title states tryin to find one for my truck have a green metal flaked 3 spoke steering wheel that im dyin to put in it.
  19. C

    can i use drop control arms with bags?

    i put a set of djm drop dontrol arms and springs with intentions of keeping it static but now have changed my mind and just goin to bag it. can i use the control arms with the bags and cups or is there going to be rubbing issues?

Latest posts

Staff online

Members online

... and 14 more.
Total: 1,475 (members: 64, guests: 1,411)

Forum statistics

Threads
64,520
Messages
1,395,748
Members
51,891
Latest member
hammerhead

Share this page

Top