Search results

  1. S

    1998 PCM Swap

    if you knew somebody with a tech 2... That has access to Mr Goodwrench they can flash your vin to any PCM, via laptop via tech 2.
  2. S

    I need an rear o2 sensor harness

    Heres the deal. It's an 2000 K2500 GMC quad cab and after buying the truck I realized its missing the rear harness for the rear o2 sensors. The exhaust is what looks like is off a 305 vortec so there is only one converter and the hole after the converter is plugged. I know i have to get the...
  3. S

    Weak power locks

    Just pop the door panel off after you take the trim piece off of the inner door handle, the tabs holding the trim work opposite from what you think so go easy so you don't break the tabs off. Now take off the door panel and you should be able to figure it out from there. Like I said its a bit of...
  4. S

    Weak power locks

    Yup what the guys said about making sure everything gets lube is the solution. I got the rear. Door locks working by doing this it's just a bit of a process if you never taken them apart. Take your time and you'll get it done.
  5. S

    Weak power locks

    Hey what's up. My 2000 k2500 crew cab power door locks are weak. I push the button on the key foab and all four make noise like they are trying to move however they don't seem power full enough to slide the whole way. Same thing with the power lock button on the inside. After a few tries of the...
  6. S

    2000 K2500 old body style with vortec 350

    Ok sweet this helps me out alot thanks am92.
  7. S

    2000 K2500 old body style with vortec 350

    Ha ha Scott I should have asked you in the first place. I've looked for that engine but couldnt find it. I guess I didn't look hard enough lol. That's what I need you the man
  8. S

    2000 K2500 old body style with vortec 350

    Yeah I would will get whatever I need to go with it and also I figured on like a 2800-3000 stall. I'd rather hear from you guys on here who have dealt with these vortecs and hopefully point me in the right direction.
  9. S

    2000 K2500 old body style with vortec 350

    Well I use it as a daily driver. It's a crew with the 4l80e and has full floating 10.5 rear end with I believe 4:10s. Im not looking for it to win any races however I want to wake her up as it is a heavy truck and originally came through with a 7.4
  10. S

    2000 K2500 old body style with vortec 350

    Ok so what cam would you guys recommend. I've heard that you can on go with one that has only so much lift. So it looks like I will stick with that injection spider set up.
  11. S

    2000 K2500 old body style with vortec 350

    Ok so here is the question... Let's say I want to build up my 5.7L so I can get at least 300hp. How can I do this and still use my PCM. Im figuring larger pistons and and a upgraded roller set up and mild cam better than a stock grind. Is a reprogram involved after the build. ? Can the upper...
  12. S

    2000 k2500 old body style.

    Man that's tough so the bricked PCM can be flash by the dealer with a stock cal from westers by the dealer? And yeah I don't want to spend that much at all. Or also do you think I could find a computer out of a 97 98 99 2500 with the 4l80e and plug and go?? I won't mind spending 500 to get me...
  13. S

    2000 k2500 old body style.

    Where do I find the calibrations file for this set up?? And do I need to buy westers garage tuner to do this? And I'm wondering if I could even communicate to the PCM cause my soulus pro cannot communicate. The check engine lite does not turn on when I switch the key to the on position. However...
  14. S

    2000 k2500 old body style.

    Wow great information just a couple questions though....the computer that I bricked with my superchips programmer came out of a k2500 and it did work fine other than the fact that it shifted quite firm up to third. Can this PCM be recalibrated or rebuilt? Flashed. I you were me what would you...
  15. S

    2000 k2500 old body style.

    But the vin on the truck is for a 454 and it has a 350 in it now. Wont the calibrations be completely different.
  16. S

    2000 k2500 old body style.

    Hey everybody... I am having a problem with my 3/4 ton. It came through originally with a 454 i just bought this truck and found this out after hooking up my soulus pro. Well it has a vortec 350 mated to a 4l80e. It ran perfect when I test drove it before buying it, however it shifted firm up...

Latest posts

Staff online

Members online

... and 7 more.
Total: 1,806 (members: 57, guests: 1,749)

Forum statistics

Threads
64,536
Messages
1,396,114
Members
51,938
Latest member
Lost0n3

Share this page

Top