Search results

  1. H

    Logging in

    For some reason, the login doesn't work. I have to type in gmt400 login from the internet in order to get to the log in page.
  2. H

    Speedometer is totally off!

    Hello, Installed a 5.3 Chevy engine into my 95 GMC truck. I have 265/70/R17 tire wheel combination. My pcm was programmed but the speedometer is off. For example, when the speedometer is showing 40mph, I'm actually driving at 48mph. I believe that my rear differential is stock from the...
  3. H

    4l60e vette servo install

    Got a problem. Installed the corvette servo kit. I can't get the snap ring on to the servo cover. Is there a special tool to buy? I've tried squeezing the ring with bare hands, fingers. Tried with needle nose pliers.etc. NEED HELP!!!
  4. H

    Chrome front bumper question

    Need a new front chrome bumper. I ordered one off of ebay, got it and was disappointed with the cheap quality of it, not to mention all the dents from shipping. Anyway, has anyone purchased the chrome bumper from LMC truck part number 39-9803? If you did, is it a good bumper? How does it...
  5. H

    FLUSHING THE TRANS USING THE TRANS

    THANKS, MARCOS!
  6. H

    FLUSHING THE TRANS USING THE TRANS

    I GUESS NOBODY CARES? OH WELL... I TRIED ASKING.
  7. H

    WANT A DRAIN PLUG FOR MY 4L60E....

    PONCHO62, THAT'S A GOOD IDEA TOO, UNFORTUNATLY CAN'T FIND ONE THAT ALSO HAS A MAGNET. I WOULD LIKE TO BE ABLE TO SEE WHAT TYPE OF WEAR THE TRANS HAS. THE PRICES OF THE PANS WITH THE DRAIN PLUGS ARE GREAT, $25-$40. IF ANYBODY SEE'S ONE WITH THE DRAIN PLUG AND MAGNET LET ME KNOW.
  8. H

    FLUSHING THE TRANS USING THE TRANS

    Want to flush out my 4l60e. The truck's a 95. Seen it done on youtube. The guy used the truck's engine running to pump out the fluid, 2 quarts at a time. Then he added 2 quarts back. He kept on until the fluid was clean. He attached a clear hose to a fitting he screwed into the top of the...
  9. H

    WANT A DRAIN PLUG FOR MY 4L60E....

    I do currently have the drilled through one installed. I don't like it, because it leaked and had to gum it up with some sealer. Doesn't look good. That's why I would prefer the weld on one.
  10. H

    WANT A DRAIN PLUG FOR MY 4L60E....

    WANTING TO WELD IN A DRAIN PLUG FOR THE 4L60E. ANYONE DONE THIS? WHAT SIZE BOLT/ NUT DID YOU USE? IS THERE A RUBBER O-RING FOR THE BOLT OR A COPPER WASHER? ANYBODY?
  11. H

    DOOR PINS - PROBLEM

    Should have been more clear on the pop sound. The door pops out when I open it. It's like its being pushed out.
  12. H

    DOOR PINS - PROBLEM

    The door still closes hard after all this time gone by. I do notice that the door pops when I open it. Bought my weatherstripping from lmc. Anyone with the same problem? Should I buy gm weatherstripping?
  13. H

    NEED NEW SHOCKS-- 95 GMC

    HAVE A 95 GMC SIERRA. THE TRUCK NEEDS NEW SHOCKS. I CAN FEEL THE BUMPY ROAD ALL THE TIME. ANYWAY, THE PREVIOUS OWNER LOWERED THE TRUCK IN THE BACK 1 ". WHAT ARE THE BEST SHOCKS FOR ME? DO I NEED TO FIND SPECIAL SHOCKS FOR THE BACK BECAUSE ITS LOWERED 1"?
  14. H

    QUESTION ABOUT SANDEN A/C COMPRESSOR

    EVEN IF I DO WHAT YOU SUGGEST, THE COMPRESSOR WILL STILL BE IN THE WAY OF THE AIR INTAKE TUBE. BY THE WAY, AWESOME TRUCK LEXTECH!
  15. H

    QUESTION ABOUT SANDEN A/C COMPRESSOR

    INSTALLED A 5.3 CHEVY INTO A 95 GMC SIERRA. NEED AIR CONDITIONING. THE SANDEN COMPRESSOR IS PROBABLY WHAT I'LL INSTALL, BUT THERE WILL BE A PROBLEM. THE COMPRESSOR WILL BE IN THE WAY OF THE AIR INTAKE TUBE GOING TO THE THROTTLE BODY. ANY REMEDIES FOR THIS PROBLEM? HAS ANYBODY CUT OR TRIMMED THE...
  16. H

    DOOR PINS - PROBLEM

    Typed onto the net about new weatherstripping and doors closing hard. I guess this is normal. It needs time to conform and to be in the heat of the sun for a while. I did notice when its out in the sun it closes perfect. I do feel a resistance when I close the door, due to the weatherstripping...
  17. H

    DOOR PINS - PROBLEM

    The lines look ok. The door latch is old, but I believe its still fine. Might buy gm hinge pins and bushings. I removed the hinge spring just to see if the door would close better. It didn't. It still closes the same. I believe that rules out the door roller. I see the door latch locks on to the...
  18. H

    DOOR PINS - PROBLEM

    Replaced the door hinge pins a while back. The door closed better for a while. Had the door open for a month while working on the interior, now the door is closing worse. Used dorman hinge pins/bushings. Did not replace the door roller. Should I replace the pins again as well as the door...
  19. H

    88-98 Bucket seat alternatives

    This might be a repeated question... Can I switch from power to manual seats? Looking for a 60/40 seat with the armrest in the middle. If I find a power one, can it be converted to a manual slider? Presently, I have an old manual bench seat.
  20. H

    HOW DO WE RESET OUR AIRBAG MODULES??????????????

    One more minor problem. I've misplaced my c- clip that holds down the clockspring. Does anyone know the size of that c- clip?
  21. H

    SHAVED TAILGATE KIT- WHICH IS THE BEST?

    Another question. Concerned about the metal on which the filler plate sits on. Will it rust after I weld the plate in? Seen somebody on youtube spray some sort of copper based spray on before welding the filler plate. Don't want rust building in there afterwards. Should I after lay some silicone...
  22. H

    Interior trim panels

    Is there a way of me seeing what my interior might look like if I changed color? Is there a website that might do this if I provide photos?
  23. H

    Interior trim panels

    Thanks everyone. Got the pieces I needed at a local salvage yard for $125. The top piece has a minute crack above the coat hanger. Will try some acrylic solvent cement for that. Otherwise it looks good. Also going to be using that special paint that lmc sells for panels. Its suppose to penetrate...
  24. H

    SHAVED TAILGATE KIT- WHICH IS THE BEST?

    Thanks for the info gentlemen. Ordered one kit. Never done this before. Going to be welding soon. Haven't broken an arc in over 10 years. Going to practice on automotive sheetmetal before welding on the tailgate.
  25. H

    SHAVED TAILGATE KIT- WHICH IS THE BEST?

    WANTING TO DO A SHAVED TAILGATE. WHO HAS THE BEST KIT FOR THIS?

Latest posts

Members online

... and 11 more.
Total: 1,440 (members: 61, guests: 1,379)

Forum statistics

Threads
64,524
Messages
1,395,848
Members
51,908
Latest member
Kendziora

Share this page

Top