Search results

  1. L

    Front end clicking and 4x4 lever wont move

    I got a 97 k1500 with a 4x4 on the floor, I used the 4x4 to go up a icy hill then shifted back into 2wd going about 15mpg. I drove 10 miles no problem then i passed a car and i heard a loud pop at about 65 and then I punched it and got up to 65 again after I got on a new road to see if I could...
  2. L

    eBay CAI

    Screw that then thanks for the help guys
  3. L

    eBay CAI

    Anyone bought a CAI off eBay I found a cheap one wanna know if it's worth my time I can't justify paying top dollar for a name brand one http://m.ebay.com/itm/4-BLUE-96-00-Chevy-C3500-K3500-Tahoe-5-0-5-7L-V8-Heat-Shield-Cold-Air-Intake-/290648553643?nav=SEARCH
  4. L

    Anyone used these hids and headlights

    I'm looking to put some aftermarket headlights on my 97 I want clear lenses with the black in the back. I found these on Amazon they come with white hids which I don't need but would be nice. I was wondering if anyone had these and how good are they, do they let in moisture or are they flimsy...
  5. L

    weird idle on my 97 5.7

    so I cleaned the IAC and triple checked the schematics and my plugs are all hooked up at first my code reader threw a p0300 for a misfire I cleared it and it went away, no on my dash command I have 4 symptoms that tested bad Catalyst Monitoring,O2 sensor,02 sensor heat, EGR system monitoring. so...
  6. L

    weird idle on my 97 5.7

    didn't get time to work on it today I did some research and a buddy of mine was telling me that the IAC gets clogged with stuff so I was directed to clean it with carb cleaner and try it again if no luck then just get a new one. And Im 99% sure I didn't mess up my plugs as I did them one at a time
  7. L

    weird idle on my 97 5.7

    No I don't have a MIL light on, so what your saying is check all my vaccum lines
  8. L

    weird idle on my 97 5.7

    Id think so I took my intake box off to get a better angle when I changed them is the vac lines in the passenger side?
  9. L

    weird idle on my 97 5.7

    so I ran a 600 mile round trip on my 5.7 with 200k miles on it everything ran perfect next day was checking fluids and It looked like my plug wire was not on the plug very well so I pulled it and decided to check the plug and somehow I snapped it in two so I took all of them out and got 8 brand...
  10. L

    Toolbox removal?

    Dang your lucky, in nebraska they rust pretty easy.
  11. L

    Toolbox removal?

    My cab was sorta rusty in the particular spot at the time and trying to twist it pretty much made my cab bent right there, so when it came to me doing it a second time I didn't mess around plus it takes a good 5 minutes
  12. L

    Toolbox removal?

    I've took 2 of those out to Mount my sub boxes under and I just rip the plastic part into pieces, and I take one of those air grinders with a like 5ish" cutting blade and cut the stud off at the base. But always put towels down so you don't burn the carpet
  13. L

    Going from 40/60 to 60/40

    The overall length is the same it's just a matter of where your holes are I put a set of 2012 seats in a friends 2002 and everything is generally the same just a difference in where your holes line up. Just drill holes and take the same bolts from your gmt400 seats and bolt them in.
  14. L

    Straight axle swap questions

    Hmmm I'll keep thinking of my options thanks for the input
  15. L

    Straight axle swap questions

    Shoot, so what would other options be for a front coil lift that don't break the bank
  16. L

    Straight axle swap questions

    So I got a 92 and 97 k1500 both of them in wanting to put 3-5" of lift on without buying and expensive lift. so I've been thinking of taking a 80's chevy front axle and taking the torsion bar setup out and going with bigger coil springs, is such a thing possible without transfer case and 4wd...
  17. L

    Tranny or Shafts or something is wrong need help

    It's about 15 miles away from my house so I ain't going to try driving it will either be trailered or I'll take the rear end pieces out and pull it. Thanks for the help I hope everything works out
  18. L

    Tranny or Shafts or something is wrong need help

    Well I'll take a better look at it and get it torn apart and see what I can do
  19. L

    Tranny or Shafts or something is wrong need help

    Ok I ran into school early and had a better look at it when I put the truck into a gear the drive shaft moves but it doesn't move the rear end I'm assuming the rear end is fried
  20. L

    Tranny or Shafts or something is wrong need help

    It is 4wd and its an automatic I did look but not too hard because I was in a hurry and the engine itself is perfect starts and everything. I was mainly wondering if this sounds like a tranny issue or something else
  21. L

    Tranny or Shafts or something is wrong need help

    I was driving my 97 k1500 about 15mph and I hit a somewhat bump not really big. And my truck made a large pop and I didn't have any power at all at the wheels and it makes a ticking noise when I put it in any gear and the rpm goes from about 750 to 1500 and the truck wont move it just makes a...
  22. L

    HELP! on making a LED lightbar

    So me and my buddy got bored and decided to try to make a light bar so we figured it would be quite easy make a casing with something inside to reflect the light and make it enhance the light have like 10-20 little 2 pin led bulbs run all the bulbs into one big positive and then have one big...
  23. L

    30" LED Bar Install + Pics

    is driving with a lightbar even street legal???
  24. L

    92 5.7 tbi terrible MPG

    in no way am i ignoring any advice, what im doing is buying a few parts at a time and installing them when I do have time. I try to do most of the work on my own and avoid the shop as much as possible even though there is some things I do not have the time or tools to do specific things. This...
  25. L

    92 5.7 tbi terrible MPG

    Ok so here's the updates i put a new distributor Cap and rotor on my plugs and wires were recently replaced i got a new spectre air filter. Also got a fuel filter but my lines have a lot of Build up does anyone have any tips for getting a fuel filter off i tried wd-40 still not Budging..... I am...

Latest posts

Staff online

Members online

... and 9 more.
Total: 1,477 (members: 59, guests: 1,418)

Forum statistics

Threads
64,467
Messages
1,394,718
Members
51,732
Latest member
kawamba

Share this page

Top