Heavychevy408
Newbie
What harness did you use
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Update
Installed cam and springs
Received the Lextech bracket on Saturday
Mocked it up. Everything looks good and fits well. Now just to get the tensioner.
You must be registered for see images attach
You must be registered for see images attach
Also figure out the fuel set up. I never knew that these connections were there. These are right at the back of the intake and bolts down to the intake. Will be unscrewing the metal tubing and adding the below fittings.
Fargola
FRA-491970-BL -6an 14mmx1.5 o-ring
FRA-491971-BL -6an 16mmx1.5 o-ring
These are female to male -6 for both
With push lock hose.
Will be about 6" hoses when done for both
You must be registered for see images attach
You must be registered for see images attach