So I finally pulled the trigger on some new lights for the Ole girl. Picked up some cheap ZMAUTO PARTS headlights with less and set of Spyder led Taillights. Also went with a 35w 6000k Kensun hid kit with the relay harness.
Before
After
Installation on the tails were pretty easy. Just unhook the pigtails and plug right in to the led housing.
Before
After
I think it's a pretty good upgrade myself. Didn't really want anything to flashy.
Went through and did some quick touch up one the bedlined bumper and grill. Hoping to get a new grill and bumper come summer time. Somehow the old grill shrunk a bit and cracked.
Before
After
Wired up the relay for the hids. Not to much to it. Hooked the fused power to the battery terminal. Connected the single passenger side headlight plug to the relay for a trigger, leaving the drivers side disconnected. Grounded both sides to the headlight bracket bolts. Got the relay ran to both ballasts that were 3m double sided taped to the rad support. Unfortunately I didn't get any pictures of any of this with the snow coming down.
The ZMauto headlight are OK for the price I suppose. Broke both the adjusters off the bat. Managed to get them adjusted before install measuring off my stock lights. Hopefully it's close enough. The corners fit right in place with no issues. The led bumper light had the original style bulb connectors with the resistors. I would have to say they were pretty damn big though. That and one for each plug.
All in all I like the outcome so far. Will see how they hold up over the rest off winter.
Before
You must be registered for see images
After
You must be registered for see images
Installation on the tails were pretty easy. Just unhook the pigtails and plug right in to the led housing.
Before
You must be registered for see images
You must be registered for see images
After
You must be registered for see images
You must be registered for see images
I think it's a pretty good upgrade myself. Didn't really want anything to flashy.
Went through and did some quick touch up one the bedlined bumper and grill. Hoping to get a new grill and bumper come summer time. Somehow the old grill shrunk a bit and cracked.
Before
You must be registered for see images
After
You must be registered for see images
Wired up the relay for the hids. Not to much to it. Hooked the fused power to the battery terminal. Connected the single passenger side headlight plug to the relay for a trigger, leaving the drivers side disconnected. Grounded both sides to the headlight bracket bolts. Got the relay ran to both ballasts that were 3m double sided taped to the rad support. Unfortunately I didn't get any pictures of any of this with the snow coming down.
You must be registered for see images
You must be registered for see images
You must be registered for see images
The ZMauto headlight are OK for the price I suppose. Broke both the adjusters off the bat. Managed to get them adjusted before install measuring off my stock lights. Hopefully it's close enough. The corners fit right in place with no issues. The led bumper light had the original style bulb connectors with the resistors. I would have to say they were pretty damn big though. That and one for each plug.
You must be registered for see images
You must be registered for see images
You must be registered for see images
All in all I like the outcome so far. Will see how they hold up over the rest off winter.