Different wheel options. If you have the spindle lift, it pushes the front wheels out and you have to run spacers on the back for the track width to be the same. If you get a 6 lug axle from a 4x4 truck, it'll widen the track width of the rear
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I love them. I'd say they are the same as Canuck's and Doetsch's. Haven't had any problems and they were able to adjust with my 2" spacers.
You must be registered for see images attachYou must be registered for see images attachYou must be registered for see images attachYou must be registered for see images attach
Where did your I get these? Do the correct the camber issue do to coil spacers?
I got these through Crown Suspension's eBay and yes, they do correct the camber issues when doing lifted coils/spacers.
The sad news though is that they don't seem to sell them anymore... just like the other places. You might be able to contact them though and see if there is anyway they could get another set.