Post your lifted 2wd's!

[95C1500]

Oh yeah! I know that name

i sent you a message anyways haha

 

[Steve's Chevy]

Hey everyone, thought I might chime in as I've been looking at this thread for years. Im not sure how many people are actually on here anymore but whatever. Im looking to get 285/70R17 MTs of some kind with 17x9 -12mm offset wheels, does anyone know how well they will fit?

You will be fine , my truck 285's and 17x9 -12 nitto

You must be registered for see images attach

']

You must be registered for see images attach

[/URL]

I even ran 33/12.50/17 general red letters with no problems

 

[Daly]

I think it really depends on the truck, my truck has 275/65r18's on 18x9 0mm offset rims and I had to notch the bumper to clear. And it still contacts on certain driveways when turning...

 

[TL73]

You must be registered for see images attach

I'll get a better pic later today
Updated Pictures:

You must be registered for see images attach

You must be registered for see images attach

 

[TL73]

Noticed you have a 2500. Did you have any issues reinstalling your coilsprings with the spacers?

 

[ZachT]

Noticed you have a 2500. Did you have any issues reinstalling your coilsprings with the spacers?

They were not bad. Just took a little smoke and black magic to reset the coil clamp compressors

 

[TL73]

They were not bad. Just took a little smoke and black magic to reset the coil clamp compressors

What year is your truck? Also, did you compress the springs in the truck or compress them out of the truck before reinstalling?

 

[ZachT]

What year is your truck? Also, did you compress the springs in the truck or compress them out of the truck before reinstalling?

It's a 98. I compressed one side in the truck and the other outside the truck. I recommend compressing it in the truck.

 

[J_lope82]

You must be registered for see images attach

Pic of my C1500 2WD with RC 4" spindle lift Kit. I am running 32" maxxis and they rub just a little on ocassions, might be massaging the front bumber a little. will do some research of things i can do other then cut the ends of the bumber. maybe extend the bumber out 1/2" or something. overall i am happy with this lift kit. i do need to put some spacers to the back tires to align the width of the rear tires to the front. I am thinking to buy the 2" spacers. View media item 30891

 

[J_lope82]

View media item 30884Another pic from the other side, this pic was taken before I did a front en alignment, right after installing the lift.