88-98 Heavy Duty Headlight Harness Kit (NEW)

[TylerZ281500]

Bad relay coil or burnt/pitted contactors in the relay will do the same thing...

ive had issues with mine i have it mocked up straight to a battery so you think itd be a relay then?

 

[great white]

ive had issues with mine i have it mocked up straight to a battery so you think itd be a relay then?

You mean the lights themselves to the batteries or the relays?

 

[TylerZ281500]

the whole baron 4hi harness plugged directly into a battery i get 12.? whatever volts to the relays and fuses except all the way at the headlight 9006/9005 plugs. i get no power there. ive tested the hids and plugs directly to the battery and they do work at full voltage. so something between the relay and the headlight connector is screwed up. i already had mobs attach grounds to the plugs because they werent grounding.

when putting power to the relays and testing them they do click as well.

 

[great white]

the whole baron 4hi harness plugged directly into a battery i get 12.? whatever volts to the relays and fuses except all the way at the headlight 9006/9005 plugs. i get no power there. ive tested the hids and plugs directly to the battery and they do work at full voltage. so something between the relay and the headlight connector is screwed up. i already had mobs attach grounds to the plugs because they werent grounding.

when putting power to the relays and testing them they do click as well.

Swap in another relay. They're cheap and easy to find.

 

[TylerZ281500]

ill try to find one. kinda odd that all 3 relays would go bad though unless its like in series that one goes out and none of them work right.

 

[great white]

ill try to find one. kinda odd that all 3 relays would go bad though unless its like in series that one goes out and none of them work right.

Dunno. I haven't seen one of these harness but three implies there's one for high, one for low and them one to do the 4Hi. The hi and low should be separate unless there's some weird kind of ground arrangement.

You could take the 4Hi relay and slave it into your non working circuit. if the lights work, the relay is your issue...

 

[jrsavoie]

Nice job

Built my own, mounted them as I wanted:

You must be registered for see images attach

Created a "power center" to gather up all the extra stuff in my vehicle in one spot.

 

[scotttick]

You must be registered for see images attach

This is a road map I've made to build my own harness, I believe this is how he is running the 3 relays for the 4 HI mod.

 

[Cadon69]

You must be registered for see images attach

This is a road map I've made to build my own harness, I believe this is how he is running the 3 relays for the 4 HI mod.

Where do the grounds go from the stock headlights? I know the positive goes to the relay, but what about the ground? I am looking at making this version instead of the one I was going to but I want to make sure I have it all correct before I put it together. Thanks


Sent from my iPad using Tapatalk Pro

 

[Purefection]

Ground goes to ground screw?