Has anyone ran 2" body lift with 35s? or 33s? and just cranked to level.

[HorneDawgZ71]

I have been searching all morning for some pictures but can't find crap. I wan't a rcx 4" for sure in the future im just having a problem getting the money together and i need new tires right now before I had down to deer camp. Can I buy my 35inch mudd grapplers and just crank a little to get the front level and throw a 1inch or a 2inch body lift on it. 3" inch is out of the question way to ugly lol. If you guys have done it or can find pictures please show me i can't find crap its always a 3" body lift. I plan on getting the 4" rcx within atleast 6 months and ill just be running up and down the highway no off roading. Thanks in advance

 

[SkyHighColorado]

I think you could get by with crank and 2" BL as long as you stay on the street. Not sure on price difference between rcx 4" and 6", but go with the 6" just don't crank it and you will be at 4". As for pics your right, not many people here have 2".

 

[ShadowRejects]

I ran 35's with a 2" block and crank. I had BFG A/t's 315/75r16's and they barely rubbed. the firece attitudes were a whole different story, they rub like crrazzzyyy with 2'' B/C,

You must be registered for see images attach

You must be registered for see images attach

 

[HorneDawgZ71]

Yah I just put BFG km2 35/12.50/17 they rub like a ***** a full crank but ill have my lift by this weekend so it's all good I reckon

 

[ShadowRejects]

Yah I just put BFG km2 35/12.50/17 they rub like a ***** a full crank but ill have my lift by this weekend so it's all good I reckon

people always say get the 6" rcx but it depends, if you want forward rake get it, if you want backwards rake get the 4" and crank the front end. my truck has a ugly rake due to the AALs raising the back end about 7" and the front 5.5"..

 

[HorneDawgZ71]

Yah I won't be getting the 6" I just want to clear 35s and stay as low as I can

 

[HorneDawgZ71]

Just curious though seems like you could do like a 1.5 inch body lift and a little crank and clear 35s but I guess nobody has tried.

 

[HorneDawgZ71]

people always say get the 6" rcx but it depends, if you want forward rake get it, if you want backwards rake get the 4" and crank the front end. my truck has a ugly rake due to the AALs raising the back end about 7" and the front 5.5"..

Doesn't the 4inch lift comes with 3 inch blocks?

 

[Kyle97GMC]

Doesn't the 4inch lift comes with 3 inch blocks?

4" blocks. The only difference is the 6" includes an AAL

 

[HorneDawgZ71]

So can you run a 3" block and crank around and actually get level with the Rcx kit installed